Heat pumps can keep Texas homes cool through long, hot summers, using the same cooling process as central air conditioners. When winter arrives, they reverse that process to bring heat indoors. Mild winters across much of the state allow them to provide heating efficiently, often with little help from backup heat.
Keeping a Texas home comfortable takes more than reaching the temperature on the thermostat, though. Along the Gulf Coast, rooms can feel clammy if the equipment cools the air without removing enough moisture.
In colder parts of the state, a heat pump that keeps your home warm on most winter days may need backup during a freeze. Knowing when that extra heat is needed can help you choose a system suited to your local climate.
Why Heat Pumps Are a Good Fit for Texas
Across much of Texas, heat pumps can handle mild winter weather without much help from backup heat. Houston and the Gulf Coast generally have milder winters than Dallas-Fort Worth, while the Panhandle and parts of West Texas require equipment suited to colder conditions. If your AC and electric furnace are both wearing out, a heat pump could replace both, making its installed cost worth comparing with the cost of replacing them separately.
Can Heat Pumps Handle the Texas Summer?
Yes, properly selected equipment can cool a home when temperatures climb above 100 degrees Fahrenheit. In cooling mode, a heat pump works like an air conditioner: it compresses refrigerant until it is hotter than the outdoor air, allowing heat collected inside the house to escape outdoors.
What matters is how much cooling the system can provide while heat comes in through the roof, windows, and walls. The rated size alone doesn’t show if a unit can keep your home cool during the hottest afternoons.
Pros and Cons of Heat Pumps in Texas
Pros
- Heating and air conditioning in one system.
- Efficient electric heating compared with resistance systems.
- Variable-speed options that can support steadier temperature and humidity control.
Cons
- Electrical work, duct repairs, or backup equipment can add to installation cost.
- Frequent electric auxiliary-heat use increases consumption during cold weather.
- Incorrect sizing or controls can leave humidity problems unresolved.
Your Satisfaction is Our Priority
We're confident you'll love your plan, but if not, call us, and we’ll help you find the perfect plan without any extra cost.*
How Does a Heat Pump Work?
Refrigerant carries heat between indoor and outdoor coils. In summer, the system absorbs heat from inside the house and releases it outdoors. In winter, it reverses the cycle to collect outdoor heat and release it inside. Even cold outdoor air contains heat the equipment can collect.
Electric resistance heating produces heat by passing electricity through heating elements. Moving heat generally takes less electricity than producing it that way.
- Ducted air-source systems distribute heated or cooled air through the home’s ducts.
- Ductless mini-splits use indoor units for individual rooms or zones, including homes and additions without ducts.
- Variable-speed heat pumps adjust how hard the compressor works as heating or cooling needs change. Both ducted systems and ductless mini-splits can have variable-speed compressors.
- Dual-fuel systems combine a heat pump and a furnace. Controls switch between them to heat the home.
Why a Bigger Unit Can Create Problems
Oversized equipment may reach the thermostat setting and shut off before removing enough moisture. Undersized equipment could struggle to maintain the temperature during the hottest weather. ENERGY STAR recommends a Manual J load calculation to determine how much heating and cooling a home needs. The calculation accounts for insulation, windows, and air leakage as well as local weather.
Ducts that leak into an attic lose air meant to heat or cool your rooms. Repairing those leaks before replacing the equipment can change the capacity your home needs.
What is a Manual J load calculation?
A Manual J load calculation helps an installer choose the right size system for your home. It accounts for insulation, windows, air leaks, and local weather, so equipment is sized for how your house gains and loses heat rather than square footage alone.
Do Heat Pumps Work in Humidity?
Rooms can reach the right temperature and still feel clammy. In cooling mode, a heat pump removes moisture as water condenses on its cold indoor coil and drains away. If the system shuts off too quickly, it may lower the temperature before removing enough moisture. Variable-capacity equipment can run longer at lower output when the house needs less cooling.
Moderately warm, humid days can be harder to manage than the hottest afternoons. Along the Gulf Coast, the thermostat may stop calling for cooling while the air indoors still holds too much moisture. U.S. Department of Energy (DOE) researchers have studied homes that need relatively little cooling in a hot, humid climate. Their research examines whether running equipment longer at lower airflow can remove more moisture without making rooms too cold. Even with those adjustments, some homes need separate dehumidification.

What Happens When Texas Gets Extremely Cold?
As outdoor temperatures fall, the house loses heat faster while an air-source heat pump’s performance and capacity can decline. Even a system that covers the full heating demand in mild weather may need help during a freeze, especially in colder parts of Texas.
To qualify for ENERGY STAR’s cold-climate designation, a heat pump must meet several requirements. At 5 degrees Fahrenheit, it must deliver at least 70% of the heating capacity it provides at 47 degrees. Even qualifying equipment may need backup heat if it cannot produce enough heat for the house.
Electric auxiliary heat uses resistance elements and increases electricity consumption when it runs. Dual-fuel controls can switch to a gas furnace instead. Auxiliary heat generally comes on automatically when the heat pump needs help. Emergency heat is a backup mode you select manually, though controls vary by system. Follow your equipment and thermostat instructions. If you frequently need emergency heat or cannot tell why it is running, have a technician inspect the system.
Both heat pumps and typical forced-air gas furnaces need electricity. A backup gas furnace will not keep heating the house during a power outage unless it also has a source of electricity.
Are Heat Pumps Energy Efficient?
Yes, especially compared with electric resistance heating. Moving heat can require less electricity than producing the same heat with resistance elements. Cooling efficiency varies by model, just as it does among central air conditioners.
DOE’s December 2024 purchasing analysis compares three heat pumps in a regional model that includes Texas. The table shows their estimated yearly electricity use for heating and cooling. SEER2 measures seasonal cooling efficiency, while HSPF2 measures seasonal heating efficiency. Higher ratings indicate greater efficiency under test conditions.
| Model in DOE’s analysis (SEER2 / HSPF2) | Modeled annual heating and cooling use |
| Highest-efficiency model (24 / 11) | 7,683 kWh |
| ENERGY STAR-level model (15.2 / 7.8) | 11,660 kWh |
| Lower-efficiency model (14.3 / 7.5) | 12,304 kWh |
DOE figures calculated for a 3-ton system using the same assumed heating and cooling hours for each model. The figures illustrate differences between equipment efficiencies rather than predict your home’s electricity use.Â
Heat Pumps vs. Other Systems
Heat Pump vs. Central Air Conditioner in Texas
Central AC needs a separate heating system, so an AC-only quote can leave out equipment you would also need to replace. For cooling performance, compare the models’ capacity and efficiency ratings; a heat pump’s added heating function does not automatically make it a better air conditioner.
| Comparison | Heat pump | Central AC |
| Summer cooling | Moves heat from indoors to outdoors. | Uses the same basic cooling process. |
| Winter heating | Reverses the cycle to provide heat, with backup if needed. | Requires a separate heating system. |
| Energy source | Electricity; gas also applies if paired with a furnace. | Electricity for cooling; heating fuel depends on the separate system. |
| Variable-speed options | Available on selected models. | Also available on selected models. |
| Installation comparison | Include indoor and outdoor equipment, controls, electrical work, and any backup. | Include AC equipment and any heating replacement needed, plus related installation work. |
Heat Pump vs. Gas Furnace in Texas
If your gas furnace is fairly new and works well, you may want to keep it. In a dual-fuel setup, the heat pump provides cooling and handles mild winter weather, while the furnace takes over when it gets colder.
Operating costs then depend on the equipment’s efficiency and your electricity and gas prices. For an all-electric setup, the annual cost estimate needs to include the electricity used by resistance backup heat. Solar panels can supply some of the electricity. Their effect on your bill depends on when the heat pump runs, what you pay for power from the grid, and any credits for electricity you send back.
How Much Electricity Does a Heat Pump Use?
There is no single monthly electricity-use figure for a Texas heat pump. Your home’s size and insulation, local weather, thermostat settings, and equipment efficiency all affect consumption. Electric auxiliary heat adds to demand whenever it runs.
Replacing electric resistance heat can reduce heating electricity use. Replacing gas heating shifts those costs onto the electric bill, so that bill may rise even as gas expenses fall. Compare a full year of gas and electricity expenses to assess the overall cost.
Your electricity rate determines how the estimated kWh translate into charges. Usage credits and time-of-use conditions can change what you pay as heating and cooling demand changes. Our guide to understanding your energy bill explains how usage appears alongside other charges.
How to Choose a Heat Pump for a Texas Home
ENERGY STAR currently requires qualifying split-system heat pumps to meet at least 15.2 SEER2, alongside heating-efficiency and other requirements. Efficiency ratings apply to the complete matched system, so the indoor and outdoor units in your quote need to match the rated combination.
The proposal should name the indoor and outdoor units and include a Manual J calculation of your home’s heating and cooling needs. It should also show whether the equipment can keep up during local summer heat. For winter, ask how much heat the system will produce at the cold outdoor temperature used in that calculation and when backup heat will take over.
| Texas region | What to discuss with the contractor |
| Houston and Gulf Coast | Moisture removal, low-output operation, and the long cooling season. |
| Dallas-Fort Worth | Cooling capacity in extreme heat, winter capacity, and backup controls. |
| Austin and San Antonio | Seasonal cooling efficiency, building heat gain, and winter design needs. |
| West Texas | Local temperature swings, summer conditions, and the home’s winter load. |
| Panhandle | Low-temperature heating capacity, cold-climate models, and backup sizing. |
Installation costs should be itemized, including duct repairs, electrical changes, backup equipment, and compatible controls. The annual cost estimate should include backup heat. If you are replacing gas heating, it should compare your combined gas and electricity costs before and after installation. The proposal should also name the warranty service provider and explain whether the installer checks airflow and refrigerant levels before finishing the job.
Are There Texas Heat Pump Rebates?
As of November 2, 2026, the Texas State Energy Conservation Office (SECO) says the state’s HOMES and HEAR rebate programs are not available. The state has been allocated $690 million, but the programs remain in planning and design with no launch date established.
SECO lists heat pumps among the proposed HEAR measures, subject to final approval. Its current FAQ says applications and reimbursements cannot yet be processed, and purchases made before launch are unlikely to qualify. Check the current rules before signing a contract that depends on a rebate.
The former federal Energy Efficient Home Improvement Credit applies to qualifying improvements made through December 31, 2025. It should not be included in a budget for a 2026 heat-pump installation. Utility or manufacturer incentives may have separate rules, so confirm availability for your address and equipment before buying.
Simplicity Meets Speed: Enroll in Under 5 Minutes
Heat Pumps FAQs
Yes, if the equipment can remove enough heat to keep up with the heat entering your home. Heat pumps use the same basic cooling process as central air conditioners.
They can be, with suitable sizing, airflow, and controls. Longer operation at lower capacity can help remove moisture when full cooling output is unnecessary. Some homes also need dehumidification.
Yes, if the system can provide enough heat at low temperatures, with backup available when needed. Cold-climate models undergo low-temperature testing, but some homes will still need backup heat during a freeze.
That depends on what each quote includes. An AC quote may cover cooling alone, leaving you to pay separately for new heating equipment. A heat pump quote should cover heating and cooling, plus any backup equipment and electrical changes.
Running costs depend on the household’s electricity and gas rates as well as equipment efficiency. Electric auxiliary heat can add to running costs during cold weather. Leaving it out of the estimate can make the heat pump look less expensive to run than it will be.
ENERGY STAR’s minimum for qualifying split-system heat pumps is 15.2 SEER2, alongside other requirements. Higher ratings indicate greater seasonal cooling efficiency under test conditions; SEER2 does not measure humidity control or winter heating capacity.
Consumption depends on the home and weather as well as the equipment. Replacing electric resistance heat can reduce heating electricity use; replacing gas heat shifts more heating expense onto the electric bill.
Heat pumps have a general life expectancy of 10 to 15 years. Installation quality and maintenance affect how long an individual system lasts.
Texas’s HOMES and HEAR rebates are not currently available. Final program approval and eligibility rules are still pending. Local utility or manufacturer incentives may be available separately.
So, Is a Heat Pump Worth It in Texas?
If your air conditioner and heating system are both wearing out, a heat pump is worth considering, especially if you currently use electric resistance heat. Keeping a newer gas furnace may make more sense for other homes. Before choosing, find out whether the equipment can keep your home comfortable through summer heat and winter freezes. Compare the full installation price and expected yearly running costs, including backup heat.
Installing a heat pump can change when and how much electricity your household uses, especially if it replaces gas heating. As you budget for the new system, explore Just Energy’s home electricity plans with that year-round demand in mind.Â
The post Do Heat Pumps Work Well in Texas? appeared first on Just Energy.














