How To Build A Polyhouse: Construction Cost, Structure, & Materials

A polyhouse (or poly tunnel) is a protective farming structure made of a frame covered with polyethylene plastic film. It creates a controlled microclimate, shielding crops from harsh weather (extreme heat, cold, rain, wind), pests, and diseases.

This allows year-round cultivation, higher yields (up to 5-10 times more than open fields), reduced water usage (drip irrigation + less evaporation), and better-quality produce.

Understanding the four pillars – Structure, Setup, Materials, and Cost – is crucial before investing. This guide breaks down each element with current facts and figures.

Part 1: Designing Your Polyhouse Framework

The structure is the polyhouse’s skeleton. Its design directly impacts durability, functionality, and cost.

Framework: Forms the shape. Galvanized Iron (GI) pipes are the gold standard (₹120-₹200/kg) – rust-resistant and long-lasting (15-20 years). Mild Steel (MS) is cheaper but needs anti-rust treatment. Bamboo (₹30-₹50/kg) is ultra-low-cost but temporary (2-4 years), suitable for small starter projects.

Covering: UV-Stabilized Polyethylene Film (150-200 microns thick) is essential. It filters sunlight, retains heat, and must withstand UV degradation. Quality film lasts 3-5 years (Cost: ₹25-₹45/sq.m). Anti-drip coating prevents condensation droplets that can spread disease. Thermic/IR additives help retain heat in cold climates.

Foundation: Anchor pipes (often set 2-3 feet deep in concrete) provide wind resistance. Critical for stability!

Ventilation: Prevents overheating. Options include:

• Manual Roll-up Side Curtains: Simplest & cheapest.
• Roof Vents: Allow hot air to escape.
• Exhaust Fans + Cooling Pads (Evaporative Cooling): Essential for high-tech setups in hot climates (Fan Cost: ₹8,000-₹25,000+; Pads: ₹300-₹600/sq.m).

Doors: Wide enough for equipment access, often covered with poly film or insect net (40-50 mesh).

Structure Types & Suitability:

1. Low-Tech (Quonset/Tunnel):
Structure: Simple semi-circular arches. Low height (Centre: 8-12 ft). Basic side ventilation (manual roll-ups).

Best For: Small-scale farmers, seasonal extension, low-budget starts, hardy crops.

Pros: Lowest initial cost, quick setup.

Cons: Limited height/crop options, poorer air circulation, less durable in extreme weather.

2. Medium-Tech (Gothic Arch or Gable):
Structure: Pointed Gothic arch or peaked “A-frame” (Gable) roof. Higher centre height (12-18 ft). Better ventilation (side + optional roof vents). Stronger against wind/snow.

Best For: Most commercial vegetable/flower growers. Balances cost, space, and environmental control.

Pros: Good height for tall crops (tomatoes, cucumbers), improved air flow and temperature uniformity, better durability.

Cons: Higher cost than low-tech.

3. High-Tech (Environmentally Controlled):
Structure: Robust frame (often wider spans), tall height (18ft+). Integrated automated systems.

Features: Automated vents/fans/pads, heating systems (tubular/gas), fertigation (nutrient injection), CO2 enrichment, sensors, climate computers.

Best For: High-value crops (strawberries, roses, exotic veggies), maximum yield & quality, year-round production in harsh climates.

Pros: Precise climate control, highest productivity potential.

Cons: Very high initial and operational costs, complex maintenance.

Part 2: Building Your Polyhouse Farm: Step-by-Step

Building a polyhouse requires careful planning and execution. Here’s the detailed process:

1. Planning & Site Preparation (1-3 Weeks):

Site Selection: Choose level ground with excellent sunlight exposure (south-facing preferred in Northern Hemisphere), good drainage, wind protection (natural barriers like trees or walls), and easy access to water and electricity. Soil testing is recommended.

Design Finalization: Decide on exact size (e.g., 500 sq.m, 1000 sq.m, 1 acre), type (Low/Med/High-tech), and layout (orientation, internal paths, irrigation lines).

Land Prep: Clear vegetation, level the ground meticulously (critical for drainage and frame stability), and mark the foundation points.

2. Foundation & Framework Erection (1-4 Weeks):

Foundation: Dig holes for anchor pipes (typically 2-3 ft deep). Set pipes vertically in concrete. Precision is vital – anchors must be perfectly aligned and level.

Framework Assembly: Assemble main hoops/trusses (arches), purlins (horizontal support bars), and ridge lines on the ground if possible. Erect the structure piece by piece, securely bolting it to the anchor pipes. Ensure perfect alignment and squareness. This stage requires skilled labor or supervision.

3. Covering Installation (3-7 Days):

Film Handling: Unroll poly film carefully on a calm, non-windy day. Avoid dragging it.

Stretching & Securing: Pull the film taut over the frame. Secure it using:

• Base Clamps: Heavy-duty metal clamps at ground level anchoring the film to the base pipe/concrete.
• Locking Channels: Aluminum profiles screwed to the frame, where the film edge is inserted and held by a spring wire.
• Wires/Batten Tape: For bamboo structures, film is often tied down with wires over batten tape to prevent tearing.

Tightness: Proper tension prevents flapping (which tears film) and pooling water.

4. Ventilation & Doors (3-5 Days):

Vents: Install manual roll-up systems on sides (using crank handles or ropes). Fit roof vents (manual or automated actuators). For fan/pad systems: Install exhaust fans on one gable end and cooling pad frames on the opposite end, connected by a water circulation system.

Doors: Frame and install sturdy doors at each end, ensuring a tight seal.

5. Internal Systems (Variable Time):

Irrigation: Lay main/sub-main pipes and install drip lines or micro-sprinklers per plant rows. Include filters, fertilizer tanks, and valves. Automation timers add significant efficiency.

Shade Nets: Install externally (over the poly film) or internally (below the frame) using wires/pulleys. Choose % shade based on crop and season (35%, 50%, 75%).

High-Tech Add-ons: Install heating pipes/units, CO2 generators, sensors (temp, humidity, light), and connect to the climate control computer.

Part 3: Essential Polyhouse Materials Checklist

Quality materials are non-negotiable for longevity. Here’s the essential list with specifications:

Polyhouse Materials List:

Pipes: GI Pipes (B-Class, 1.5″ NB, 1.2mm thickness is common). Avoid substandard galvanization. *Cost Factor: ~40-50% of total material cost.*

Fittings: Tees, Elbows, Base Plates, Clamps, Bolts/Nuts (Galvanized). Use hot-dip galvanized for corrosion resistance.

(Bamboo Alternative): Treated bamboo poles (≥ 3″ diameter), strong binding wire/rope.

Covering Materials:

Poly Film: Must be UV Stabilized (5-8 year warranty). 150-200 micron thickness. Anti-drip and Anti-dust coatings are highly recommended. IR/AD for colder areas. *Cost Factor: ~15-20% of total material cost.*

Insect Net: 40-50 Mesh (holes per inch), UV-stabilized HDPE. For vents and doors.

Shade Net: Knitted HDPE, UV-stabilized. Choose % shade (Green/Aluminet). *Cost: ₹15-₹40/sq.m.*

Foundation Materials: Anchor Pipes (GI, 1.5″-2″), Cement, Sand, Aggregate (Gravel).

Ventilation Materials:

Roll-up Systems (Pipes, Cranks, Cords).

Exhaust Fans (Axial flow, CFM rating matched to polyhouse volume).

Cooling Pads (Cellulose pads, 4″ or 6″ thick).

Water Tank, Pump, Distribution Pipes/PVC for pad system.

Door Materials: GI Pipe Frame, Poly Film/Insect Net Cover, Hinges, Latches.

Irrigation Materials: Main/Sub-main PVC/HDPE Pipes, Drip Lines (Emitter spacing based on crop), Emitters, Filters (Sand/Media, Disc, Screen), Valves, Fertilizer Tank/Venturi, Controller.

Fasteners & Sundries: GI Wires, Nuts, Bolts, Screws, Clamps, Channels, Spring Wires. Always get a detailed “Polyhouse Material List PDF” from your supplier!

Part 4: Calculating Polyhouse Setup Costs

Understanding costs prevents budget overruns. *All figures are indicative per square meter (sq.m) in Indian Rupees (₹). USD equivalents (~$6.5-23+/sq.m) are approximate.*

Small Low-Tech (500 sq.m / ~0.12 Acre): ₹275,000 – ₹500,000 ($3,300 – $6,000)

Standard Medium-Tech (1000 sq.m / ~0.25 Acre): ₹750,000 – ₹1,500,000 ($9,000 – $18,000)

Commercial High-Tech (4000 sq.m / ~1 Acre): ₹6,000,000 – ₹14,000,000+ ($72,000 – $168,000+)

The “Cheapest Polyhouse” Reality: Involves compromises: Bamboo frame (limited lifespan), standard (non-AD/IR) poly film (shorter life, potential disease issues), minimal/no ventilation (risk of heat stress), manual irrigation, DIY labor (risk of errors). Suitable only for very small scale, short-term use, or resilient crops.

Critical Cost Factors:

Size: Larger polyhouses cost less per sq.m due to shared infrastructure (e.g., end walls).

Technology Level: Automation (vents, irrigation, climate control) adds significant cost.

Material Quality: Never compromise on poly film UV protection. Cheap GI rusts quickly. Quality pays back in longevity.

Labor: Professional construction ensures durability but costs more. DIY requires high skill.

Location: Remote sites increase transport costs for materials. Local labor/material prices vary.

Site Conditions: Rocky soil, slopes, or poor drainage increase foundation/labor costs.

Ongoing Costs: Budget for:

• Poly Film Replacement: Every 3-5 years (₹40-₹70+/sq.m).
• Maintenance: Fixing tears, lubricating vents, checking irrigation, replacing worn parts.
• Utilities: Electricity (fans, pumps), Water, Fuel (heating).
• Crop Inputs: Seeds, fertilizers, pesticides.

Part 5: Selecting Polyhouse Construction Companies

Partnering with the right company ensures quality and avoids costly mistakes.

Why Experience Matters: Reputable Polyhouse Construction Companies understand local conditions (wind/snow loads), use quality materials (especially film), ensure proper tensioning and sealing, and offer warranties.

Finding Reliable Companies:

• Government Sources: State Horticulture/Agriculture Departments (often have empaneled vendors).
• Agricultural Universities: KVKs (Krishi Vigyan Kendras) or research stations can recommend suppliers.
• Online Directories: Agri-focused platforms (e.g., Agri Exchange, Justdial) or manufacturer websites (e.g., Agriplast, Netafim).
• Trade Shows: Agriculture and Horticulture expos are excellent for meeting multiple vendors.

Key Questions to Ask:

1. “Can I visit a polyhouse you built 2+ years ago?” (Check film condition, frame rust, ventilation function).
2. “Can you provide 2-3 references from past clients in my area”
3. “What brand and specifications of poly film do you use? What is its UV warranty?” (Get it in writing).
4. “Do you provide a detailed material list and breakdown in the quote?”
5. “What is the construction warranty on the structure and workmanship?”
6. “Do you offer after-sales support or maintenance services?”
7. “Can you handle the irrigation system installation as part of the project?”

Comparing Quotes: Ensure quotes are like-for-like (same structure type, size, material specs, inclusions like irrigation/shade net). Don’t just choose the lowest price; prioritize transparency, material quality, and warranty.

Conclusion

A polyhouse is a powerful tool for transforming farm productivity and income. Success hinges on meticulously balancing your Structure choice (driven by crop needs and budget), understanding the Setup process, investing in quality Materials (especially UV-protected poly film and GI framework), and having a realistic grasp of the total Cost (both initial and ongoing).

• Start Smart: Define your primary goal (season extension? high-value crops? year-round production?) and budget. A well-built Medium-Tech polyhouse often offers the best long-term value for most commercial growers.
• Prioritize Quality: Cutting corners on materials, especially the poly film or framework, leads to premature failure and higher costs. Invest in proven suppliers.
• Seek Expertise: For anything beyond a small Low-Tech structure, professional design and construction from reputable Polyhouse Construction Companies significantly increases your chances of success and return on investment.
• Plan for the Long Term: Factor in replacement costs (film) and maintenance from day one.

By thoroughly understanding these core elements – Structure, Setup, Materials, and Cost – you can make an informed decision and build a polyhouse that delivers sustainable profits for years to come.

• Source: https://cultivationag.com/how-to-build-a-polyhouse-construction-cost-structure-materials/